■Getting Ready to Shoot with Past Movie
1. In the REC mode, press [BS].
[BS]
2.Use [S], [T], [W], and [X] to select the “Past
Movie” scene and then press [SET].
This causes “ 
” to appear on the monitor screen, which indicates that Past Movie is enabled.
■Shooting a Past Movie
1.With the camera pointed at the subject, press [ 
].
2.Press [ 
] again to stop shooting.
Movie recording also will stop automatically if memory becomes full before you press [ 
].
IMPORTANT!
•When Past Movie is selected, the camera continually
updates an internal buffer that holds about five seconds of movie images of what has happened in front of the camera’s lens. When you press [ 
], your movie will start with the buffer’s current contents and continue from there. Be sure to keep the camera still and pointed in the direction of the subject for some time before you press [ 
] to start shooting.
B | 101 | SHOOTING A MOVIE |
|
| |
|
|
|