IMPORTANT!

Pressing [ON/OFF] or [] (REC) to turn on power also causes the lens to extend. Take care there is nothing

pressing against or hitting the lens. Holding the lens with your hand so it cannot extend creates the risk of malfunction.

NOTE

Pressing [] (PLAY) while in the REC mode switches to the PLAY mode. The lens retracts about 10 seconds after

switching modes.

Auto Power Off (page 45) will turn off power automatically if you do not perform any operation for a preset amount of time. If this happens, turn power back on.

Turning Power Off

Press [ON/OFF] (Power).

NOTE

You can configure the camera so power does not turn on

when you press [] (REC) or [] (PLAY). You can also configure the camera to turn off when you press [] (REC) or [] (PLAY) (page 208).

Turning On Power for the First Time

The first time you load a battery into the camera, a screen appears for configuring screen text language, date, and time settings. Use the procedure under “Configuring Display Language, Date, and Time Settings” (page 11) to configure the settings correctly.

IMPORTANT!

Failure to set the date and time will cause the wrong date and time data to be recorded with images.

If you make a mistake when configuring the language, date, and time settings, you can change the settings (pages 202, 206).

44

GETTING READY