5.When the message “Face recognition successful!” appears, use [S] and [T] to

select “Save” and then press [SET].

This will record the face data and return to the recording screen.

•To re-record the face data, select “Cancel”.

NOTE

•You can have up to six sets of face data recorded in the camera.

•Face data is stored in the camera’s built-in memory, in a folder named “FAMILY” (page 253). Any manipulation of the data in the “FAMILY” folder can cause the camera to stop operating properly. Never delete or edit any data in the “FAMILY” folder.

■Using Edit Family to Assign a Priority Level to Recorded Face Data

After recording face data, you can assign a name and a priority level that controls how the data is applied when shooting a snapshot.

1.Enter a REC mode.

2.Press [S] ( ) once.

3.Use [W] and [X] to select “ Edit Family” and then press

[SET].

This display the face data editing screen.

4.Use [S], [T], [W], and [X] to select the face data you want to edit, and then press [SET].

89

SHOOTING A SNAPSHOT