Using On-screen Menus

The following are menu operations you will need to use to configure camera settings. Take a few moments to become familiar with them.

See “Menu Reference” on page 273 for information about menu contents.

You also can use the Operation Panel (page 55) to configure some of the settings that appear on the menu screen. In any case where the same setting can be configured both on the Operation Panel and on the menu screen, the Operation Panel operation is always shown.

Example Menu Screen

Tabs

Press [MENU] to display the menu screen.

Menu contents are different in the REC mode and PLAY mode. This screen shows a REC mode menu.

Settings

Menu Screen Operation Buttons

[W] [X] Select tabs. [X] is also used to apply a setting.

[S] [T] Select a setting option.

[SET] Applies the selected settings.

[MENU] Exits the menu screen.

The following is the procedure for menu operations in the REC mode.

1.In the REC mode, press [MENU].

This displays the menu screen.

2.Use [W] and [X] to select the tab where the item you want to configure is located.

Here, we will select the “REC” tab.

3.Use [S] and [T] to select the item you

want to configure and then press [X].

Example: Select “Focus” and then press [X].

52

GETTING READY