■Copying a Single File from a Memory Card to Built-in Memory

With this procedure, files must be copied one-by-one.

1.Load the memory card that contains the file you want to copy into the camera.

2.Turn on the camera, enter the PLAY mode and then press [MENU].

3.On the “PLAY” tab, select “Copy” and then press [X].

4.Use [S] and [T] to select “Card Built-in” and then press [SET].

5.Use [W] and [X] to select the file you want to copy.

6.Use [S] and [T] to select “Copy” and then press [SET].

This starts the copy operation. Wait until the “Busy... Please wait...” message disappears from the monitor screen before performing any operation on the camera.

•The copied image reappears on the monitor screen after the copy operation is complete.

7.Now you can repeat steps 5 and 6 to copy another file, or you can exit this procedure by pressing [MENU].

NOTE

•Files are copied to the folder in built-in memory whose name has the largest serial number.

195

MANAGING YOUR FILES