3. Press the camera’s [ON/OFF] button to turn it

7. Press the USB cradle’s

on and then press [MENU].

[USB] button.

• Do not place the camera on the USB cradle yet.

4.

On the “Set Up” tab, select “USB” and then

 

 

press [X].

 

5.

Use [S] and [T] to select “Mass Storage” and

[USB]

USB Lamp

 

then press [SET].

 

6.Press the camera’s [ON/OFF] button to turn it off and then place the camera on the USB cradle.

•Do not place the camera onto the USB cradle while it is turned on.

•If you plan to transfer images from the camera’s built-in memory to your computer, make sure there is no memory card loaded in the camera.

227

USING THE CAMERA WITH A COMPUTER