IMPORTANT!

•Due to differences in the power requirements of each mode, the battery indicator may show a lower level in the PLAY mode than what it shows in a REC mode. This is normal, and does not indicate malfunction.

•Leaving the camera for about 12 hours with no power

supplied while the battery is dead will cause its date and time settings to be cleared. You will have to re-configure the settings after power is restored.

Replacing the Battery

1.Open the battery cover.

2.With the camera oriented with its monitor screen facing upwards as shown in the illustration, slide the stopper in the direction indicated by the arrow and hold it there.

• This will cause the battery to come out part way.

Stopper

3.While still holding the stopper, pull the battery out the rest of the way.

4.Load a new battery.

41

GETTING READY