2. Press the USB cradle’s [PHOTO] button to start the slideshow.
The slideshow is performed in accordance with the settings
you configured with the procedure on page 156. The
To stop a slideshow
Press the USB cradle’s [PHOTO] button. This will turn off the camera.
IMPORTANT!
• The battery does not charge while a slideshow is in |
progress. To charge the battery, stop the slideshow. |
camera will turn off
[PHOTO]
• Do not remove the camera from the cradle while a |
automatically after the time you specified with the “Time” setting elapses.
•You can change the slideshow setting by pressing [MENU] while a slideshow is in progress. After configuring the settings, press [MENU] again to restart the slideshow.
•To adjust the level of audio volume during a slideshow, use [S] and [T] to adjust the volume.
slideshow is in progress. Doing so can cause data to |
become corrupted. |
NOTE
•You can connect the USB cradle to a TV and enjoy the slideshow on a big screen. You can also connect to a video recording device and record a slideshow (page 162).
161
VIEWING SNAPSHOTS AND MOVIES