3.With the camera positioned so the monitor screen is facing towards you as shown in the
illustration, place it onto the USB cradle.
The [CHARGE] lamp lights red and charging starts.
•It takes about two hours to achieve a full charge. Actual charging time depends on current battery capacity, remaining power, and charging conditions.
Cradle contact
Carefully insert the camera as far as it will go.
[CHARGE] lamp
Camera contact
When charging is complete
The [CHARGE] lamp, which was lit red during charging, changes to green.
Remove the camera from the USB cradle and unplug the AC power cord from the power outlet.
If the [CHARGE] lamp flashes green
This indicates that charging cannot be performed because you have just finished using the camera, or because the temperature in your location is too hot or too cold. If this happens, wait until the camera returns to normal temperature. When the camera returns to a temperature where charging can be performed, the [CHARGE] lamp will light red.
38
GETTING READY