■Configuring the Same DPOF Settings for All the Images
1.In the PLAY mode, press [MENU].
2.On the “PLAY” tab, select “DPOF Printing” and then press [X].
3.Use [S] and [T] to select “All images” and then press [X].
4.Use [S] and [T] to specify the number of copies.
•You can specify up to 99 for the number of copies. Specify 0 if you do not want to print.
5.If you want to include the date in the images, press [BS] to change the displayed date stamping setting to “On”.
•To turn off date stamping, press [BS] so “Off” is displayed.
6.After everything is the way you want, press [SET] to save the settings.
Clear DPOF settings when you no longer need them!
DPOF settings are not cleared automatically after printing is complete. This means that if you perform another printing operation without clearing DPOF settings, printing will be performed in accordance with the last settings you configured. If you no longer need the currently configured DPOF settings, use the procedure under “Configuring the Same DPOF Settings for All the Images” to change the number of copies setting for all the images to 00.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be
sure to tell them that it includes DPOF settings for the images to be printed and the number of copies. If you don’t, the print service may print all the images without regard to your DPOF settings, or they may ignore your date stamp setting.
B | 217 | PRINTING |
|
| |
|
|
|