4. Use [S] and [T] to select “On” and then press [SET].
An image that is protected is indicated by the “
” icon.
5.Now you can repeat steps 3 and 4 to protect another image or exit this procedure by pressing [MENU].
To unprotect a specific file
Perform the procedure under “Protecting a Specific File”, but in step 4 select “Off” instead of “On”.
■Protecting All Files in Memory
1.In the PLAY mode, press [MENU].
2.On the “PLAY” tab, select “Protect” and then press [X].
3.Use [S] and [T] to select “All Files : On” and
then press [SET].
This protects all files currently in memory.
4.Press [MENU].
To unprotect all files in memory
Perform the procedure under “Protecting All Files in Memory”, but in step 3 select “All Files : Off” instead of “All Files : On”.
191
MANAGING YOUR FILES