6.Press [T] to perform the required cut operation(s).

For this type of cut

Do this:

operation:

 

 

 

 

 

 

 

 

 

 

Cut

Select the point up to which you

 

 

 

 

 

 

 

 

 

 

 

 

(To-Point Cut)

want to cut and then press [T].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cut

Select the point from which you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(From-Point Cut)

want to cut and then press [T].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.Select the start point of the center

 

 

 

 

 

 

 

 

 

Cut

segment and then press [T].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Point-To-Point Cut)

2.Select the end point of the center

 

 

 

 

 

 

 

 

 

 

segment and then press [T].

 

 

 

 

 

 

 

 

 

 

 

7.In response to the confirmation message that appears, use [S] and [T] to select “Yes” and then press [SET].

•To cancel movie editing, select “No” instead of “Yes” and then press [SET]. This will return to the paused movie playback screen.

•The selected cut operation will take considerable time to complete. Wait until the “Busy... Please wait...” message disappears from the monitor screen before performing any operation on the camera. Note that a cut operation can take a very long time if the movie being edited is long.

Creating a Snapshot of a Movie Frame

(MOTION PRINT)

MOTION PRINT lets you capture a movie frame and use it to create a snapshot. The snapshot you create can be either of the two formats described below.

9-frameThis format puts the Snapshot selected movie frame

in the center, the four frames that precede it along top and the four frames that follow it along the bottom.

1-frameThis format creates a Snapshot snapshot using the

selected movie frame only.

C

182

EDITING IMAGES