■Checking the Flash Mode

The current flash mode is indicated on the monitor screen and by the operation lamp when you half-press the shutter button.

Operation Lamp

Flashes orange while the flash is charging.

2N

AF

“ ” indicates flash will fire.

•You will not be able to take another flash snapshot until the operating lamp stops flashing orange, which indicates that charging is complete.

■Changing the Flash Intensity

1.In the REC mode, press [MENU].

2.On the “Quality” tab, select “Flash Intensity” and then press [X].

3.Use [S] and [T] to select the flash intensity

setting you want and then press [SET].

You can set one of five levels, from –2 (weakest) to +2 (strongest).

IMPORTANT!

•Flash intensity may not change when the subject is too far away or too close.

77

SHOOTING A SNAPSHOT