Turning the Startup Screen On or Off

You can configure the camera to display a startup screen of an image you recorded, whenever you turn it on.

•Even if you configure startup screen settings in the PLAY mode, the startup screen does not appear when turn on the camera by pressing [ ] (PLAY).

1.Press [MENU].

2.On the “Set Up” tab, select “Startup” and then press [X].

3.Use [W] and [X] to scroll through the images until the one you want to use as the startup screen is on the monitor screen.

4.Use [S] and [T] to select the setting you want and then press [SET].

To do this:

Select this setting:

Use the selected image as the

On

startup screen

 

 

 

Turn off the startup screen

Off

 

 

NOTE

•The following are the types of images that you can select for the startup screen.

–Special startup screen images built into the camera

–Snapshots

–Audio snapshots (Audio does not play.)

•Only one startup screen image can be in effect at any time. To change the startup screen to another image, simply overwrite the current image with the new one.

•Formatting built-in memory (page 209) will delete the current startup screen image.

200

OTHER SETTINGS