2.Connect the USB cable that comes bundled with the camera to the USB cradle and the USB port of your Macintosh.

USB Cable (Bundled)

 

 

Connector

USB Port

Mini-B

Connector A

 

[

] (USB) Connector

Orient the USB plug so it correctly matches the shape of the USB port when you connect them.

Plug the USB cable into the ports securely, as far as it will go. Proper operation is not possible if connections are not correct.

3.Press the camera’s [ON/OFF] button to turn it on and then press [MENU].

Do not place the camera on the USB cradle yet.

4.On the “Set Up” tab, select “USB” and then press [X].

5.Use [S] and [T] to select “Mass Storage” and then press [SET].

6.Press the camera’s [ON/OFF] button to turn it off and then place the camera on the USB cradle.

Do not place the camera onto the USB cradle while it is turned on.

If you plan to transfer images from the camera’s built-in memory to your Macintosh, make sure there is no memory card loaded in the camera.

246

USING THE CAMERA WITH A COMPUTER