Selecting the Face Detection Method (Priority)

Use the following procedure to specify whether you want to give priority to faster speed or a higher number of faces during face detection.

1.Enter a REC mode.

2.Press [S] ( ) once.

3.Use [W] and [X] to select “ Priority” and then press [SET].

4.Use [S] and [T] to select the setting you want, and then press [SET].

Face Recognition Precautions

The maximum number of faces that can be detected at one

time is five when “Speed” is selected for the “Priority” setting,

and ten when “Quantity” is selected.

Detection of the following types of faces is not supported.

– A face that is partially obstructed by hair, sunglasses, a hat,

 

etc

A face that is shaded from the light

A profile of a face that is not shot straight on

A face that is tilted left or right

A face that is very far away or very small

A face that is very close or very large

A face in an area that is very dark

Face detection is not supported for animals or other non-

To do this:

Select this setting:

human subjects.

Even if you have the face of a family member recorded, the

Minimize face detection time. Up to five

person’s facial expression, shooting conditions, or other

faces can be detected.

Speed

factors can make proper recognition (highest priority

assignment) impossible.

Allow detection of a maximum of five to ten

faces.

NOTE

Quantity

Face recognition can be improved by recording multiple

versions of the same person’s face indoors and outdoors, with

different expressions, and at different angles.

Selecting “Quantity” while using the Normal mode will make it possible to detected smaller faces at a greater distance than when “Speed” is selected.

92

SHOOTING A SNAPSHOT