4.Use [S] and [T] to select the setting you want, and then press [SET].

To get this:

Select this setting:

 

 

+2

Brighter

+1

0

–1

Darker

–2

•To cancel the brightness adjustment operation, press [W] or [MENU].

IMPORTANT!

•Adjusting the brightness of an image creates a new image with the new brightness level. The original image also remains in memory.

•When you display a brightness adjusted image on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the brightness was adjusted.

Reducing the Effects of

Underexposure

You can use the following procedure to reduce underexposure only, while maintaining the bright areas of an image.

1.In the PLAY mode, use [W] and [X] to select the image you want to correct.

2.Press [MENU].

3.On the “PLAY” tab, select “Dynamic Range”, and then press [X].

4.Use [S] and [T] to select the setting you want and then press [SET].

When you want to do this:

Select this setting:

Apply Dynamic Range to a

Expand +2

greater extent than “Expand +1”

 

 

Reduce underexposure

Expand +1

 

 

C

179

EDITING IMAGES