Adjusting Image Contrast

Use the following procedure to adjust the contrast of your images.

1.In the REC mode, press [MENU].

2.On the “Quality” tab, select “Contrast” and then press [X].

3.Use [S] and [T] to select the setting you want and then press [SET].

You can specify one of five contrast settings from +2 (most contrast between light and dark) to –2 (least contrast

Date Stamping Snapshots

You can have the snapshot’s recording date only, or date and time stamped in the lower right corner of the image.

1.In the REC mode, press [MENU].

2.On the “Set Up” tab, select “Timestamp” and then press [X].

3.Use [S] and [T] to select the setting you want and then press [SET].

Example: December 24, 2007, 1:25 p.m.

between light and dark).

To do this:

Select this setting:

Display the date only (2007/12/24)

Date

Display the date and time (2007/12/24

1:25pm)

Date&Time

Display nothing

Off

141

ADVANCED SETTINGS