Getting Ready to Shoot with Short Movie

1.In the REC mode, press [BS].

2. Use [S], [T], [W], and [X] to select the “Short Movie” scene and then press [SET].

This causes “ ” to appear on the

monitor screen. Pressing [ ] at this point will shoot a

Short Movie with a 4-second first part

and a 4-second second part.[BS] If you want to configure settings for the

length of the first part, the length of the

4.Use [S] and [T] to select how long (in seconds) you want the first part of the Short

Movie to be and then press [X].

5.Use [S] and [T] to select how long (in seconds) you want the second part of the

Short Movie to be and then press [X].

Past part

Future part

length

length

MOTION PRINT settings

second part, or MOTION PRINT settings, continue from step 3.

3.Press [SET].

The total length of a Short Movie (first part plus second part) must be at least two seconds and no longer than eight seconds.

If you specify five seconds for the first part in step 4, for example, you can specify no more than three seconds for the second part. Specifying a value greater than three, in this case, will cause the length specified for the first part to be reduced automatically.

98

SHOOTING A MOVIE