Chapter 3 Avaya P460 Chassis and Module Installation

Installing the P460 on a Table Top

Place the system on a surface that supports at least 100 lbs (45 kg).

5Install the supplied rubber feet to the bottom of the switch, placing the feet in the square recesses provided. See Figure 3.2.

Clean the surface of any oils or residue before applying the feet.

Figure 3.2 Table-Top Installation

Rubber feet

6Ensure that all the preinstalled components are firmly installed in the chassis. These include:

Supervisor modules

Power supply

Fan module

Caution: Do not place other equipment on top of the P460.

Rack Mounting

Danger: To avoid injury, Avaya recommends that two people to lift the switch onto a table top. A fully loaded P460 switch weighs at least 100 lbs (45 kg).

You can mount the Avaya P460 in a standard 19" rack either in “front-mount” or “mid-mount” positions with the brackets supplied with the chassis.

The brackets are symmetric: you can fix either bracket one either side.

Avaya P460 Installation and Maintenance Guide

7

Page 21
Image 21
Casio manual Installing the P460 on a Table Top, Rack Mounting