Chapter 3 Avaya P460 Chassis and Module Installation

Figure 3.11 I/O Module Component Location

 

1

2

2

3

3

Key

1Module label

2Securing screws

3Locking handles

I/O Module Installation Procedure

To install an I/O module:

1Remove the blanking plate by unscrewing the captive screws and gently pulling the plate towards you.

2Open the locking handles at the edge of the front panel. See Figure 3.12.

3Position the module as shown in Figure 3.12.

4Gently slide the module in.

Ensure the hooks on the locking handle are aligned with the matching holes on the chassis.

5Close the locking handles.

XThe module slides back and connects to the backplane.

6 Gently tighten the screws.

For module-specific information, refer to the Installation Guide shipped with the module.

Avaya P460 Installation and Maintenance Guide

17

Page 31
Image 31
Casio P460 manual 11 I/O Module Component Location, Module Installation Procedure