Turbomachinery Package SpecificationTitan 250 Generator Set
Maximum Flow Demand Rate | 4.67 nm3/min. (165 scfm) |
Main Lube Oil Duplex Filters |
|
Type | |
Duplex Filters | 10 Micron |
Certification | ASME, Section VIII, Division 1 |
Backup Lube Oil Pump Filter |
|
Type | Bowl Filter |
Minimum/Maximum Operating Temperatures | |
Simplex Filter | β X > 75 Micron |
Lube Oil Vent Coalescer |
|
Type | Air/Oil Mist Eliminator |
Maximum Working Temperature | 93°C (200°F) |
Orientation | Vertical |
Performance | 100% removal of all droplets greater than 3 |
| microns and 99.5% removal of all droplets less |
| than 3 microns. |
Certification | ASME, Division 1 |
Approximate Dimensions (Height x Diameter) | 198.1cm x 121.9 cm (77.9 in. x 48 in.) |
Approximate Weight | 1093 kg (2,410 lb) |
Lube Oil Vent Flame Arrestor |
|
Orientation | Vertical, See Note (f) |
Approximate Dimensions (Height x Width x | 32 cm x 23 cm x 22 cm |
Diameter) | (13 in. x 9 in. x 9 in.) |
Approximate Weight | 11 kg (25 lb) |
Strainers |
|
Tank Fill | 20 mesh |
Gearbox Breather Vent (If Applicable) | 40 mesh |
Gas Producer | 70 Micron, See Note (g) |
Gearbox | 70 Micron, See Note (g) |
Compressor Driven End | 70 Micron, See Note (g) |
Compressor Exciter End | 70 Micron, See Note (g) |
Lube Oil |
|
Viscosity Grade ISO VG 32 (C32) | Use When Ambient Temperature is < 110°F |
Viscosity Grade ISO VG 46 (C46) | Use When Ambient Temperature is > 110°F |
Pour Point | Must Be At Least 6°C (11°F) Below The Lowest |
| Ambient Temperature) |
Lube Oil Tank Capacity | 11 450 L (3025 gal), See Note (h) |
Weight | 1995 kg (4,400 lb) |
Construction Materials |
|
Piping, Manifolds, and Tubing | 316L Stainless Steel |
Lube Oil Tank and Tank Covers | Carbon Steel (Standard) |
| 316L Stainless Steel (Optional) |
Construction Materials (Cont’d) |
|
Main Lube Oil Duplex Filter Housing and Transfer | Carbon Steel (Standard) |
Valve | 316L Stainless Steel (Optional) |
Backup Lube Oil Pump Filter Housing | Carbon Steel (Standard) |
| 316L Stainless Steel (Optional) |
Lube Oil Vent Coalescer | Carbon Steel (Standard) |
| 316L Stainless Steel (Optional) |
Lube Oil Vent Flame Arrestor | Aluminum |
© 2008 Solar Turbines Incorporated. All rights reserved. | TPS250GS/908 - Preliminary |
27