Turbomachinery Package Specification | Titan 250 Generator Set |
|
|
•Generator acceptance test report
•American Society of Mechanical Engineers (ASME) data reports, as applicable
•Solar’s Certificate of Compliance
If specified on the final project ITP, the QC data book may also include the following documents at additional cost and increased delivery time:
•Engine rotor balance record
•Engine casing leak test record
•Documentation from suppliers of major package components such as oil coolers, oil filters, gearboxes and driven equipment
•Optional electrical device list when applicable
•
A torsional analysis can be performed on the entire drive train to determine if there are any significant torsional resonance conditions within ±10% of the operating speed range. If a resonance condition (interference) is found, then a fatigue analysis is performed to confirm the resonance will not cause fatigue failure in the shafting.
17.5.3Lateral Analysis Report (Optional)A lateral forced response analysis of the driven equipment can be performed to confirm that any lateral critical speeds aren’t close enough to the operating speed range to cause lateral vibration problems.
17.5.4Operation and Maintenance Instruction ManualThe Operation and Maintenance Instruction Manual (OMI) provides descriptive and instructional data for operating and servicing the turbomachinery package. General, functional, and component descriptions of the turbine engine and associated package systems with supporting illustrations are included in four volumes:
•Systems Operator's Guide - Intended for the equipment operator, the systems operator’s guide provides familiarization with controls and indicators, operating procedures, and safety precautions to ensure safe equipment operation.
•Maintenance Instructions - Intended for maintenance and field service personnel, the maintenance instructions include preventive and corrective procedures, including periodic inspection requirements, alignment procedures, cleaning procedures, removal and installation procedures, adjustment procedures, and tolerances.
•Supplementary Data - Provided in the form of supplier manuals and data sheets, the supplementary data provides descriptions of components and assemblies not covered or fully discussed in the Maintenance Instructions volume. Due to copyright restrictions, supplementary data from suppliers is available in English only.
•Illustrated Parts List - Provides part numbers, part names, quantities, reference designators, and illustrations for locating and ordering parts.
•Language - The OMI is provided in English. Other languages are available as an option.
The OMI manual typically includes the following features:
•Electronic viewing of data in a Windows environment
•All volumes of the manual set on one
•Search feature including full text search for supplier data
© 2008 Solar Turbines Incorporated. All rights reserved. | TPS250GS/908 - Preliminary |
68