CAT Titan 250 Table 12. Accessory Equipment Specifications

Turbomachinery Package SpecificationTitan 250 Generator Set

Table 12. Accessory Equipment Specifications

120 VDC Battery and Charger System

Charger Type		Floor Mount
Supply Voltage		380, 400, or 415 VAC, 50 Hz, 3 phase
		460 VAC 60 Hz, 3 phase
Operating Temperature		-10 to 50°C (14 to 122°F)
Approximate Measurements (Charger)
Height		1.21 m (47.5 in.)
Width		0.98 m (38.5 in.)
Depth		0.65 m (25.5 in.)
Approximate Measurements (Lead Acid Batteries)
Height		1.78 m (5.8 ft)
Width		3.05 m (10.0 ft)
Depth		0.76 m (2.5 ft)
Approximate Measurements (NiCd Batteries)
Height		1.65 m (5.4 ft)
Width		4.83 m (15.8 ft)
Depth		1.02 m (3.3 ft)
Turbine Cleaning System
Water/Solvent Supply Pressure		85 to 100 psig (586 to 689 kPag)
Water/Solvent Supply Min. Temperature		Ambient (Except In Extreme Cold)
On-Line Water/Solvent Flow Rate		2.3 – 4.5 L/min (0.6 – 1.2 gpm)
On-Line Propulsion Air Flow Rate		0.026 nm3/min (0.98 SCFM)
Package On-Line Triple Stage Strainer		300/200/100 Micron
On-Crank Water/Solvent Flow Rate		9.1 – 12.9 L/min (2.4 – 3.4 gpm)
On-Crank Propulsion Air Flow Rate		0.080 nm3/min (3.0 SCFM)
Package On-Crank Triple Stage Strainer		300/200/100 Micron
External Air Supply		Clean Filtered Air
Air Supply Pressure		586 to 690 kPag (85 to 100 psig)
Turbine Cleaning Cart
Capacity		98 L (26 gal)
Tank Discharge Strainer		100 Micron
External Air Supply		Clean Filtered Air
Air Supply Pressure		586 to 690 kPag (85 to 100 psig)
Approximate Measurements
Height		102 cm (40.2 in.)
Width		55 cm (21.7 in.)
Length		121.6 cm (47.87 in.)
Approximate Weight		86 kg (190 lb)
Tank Material		316L Stainless Steel
Certification		American Society of Mechanical Engineers
		(ASME) or Pressure Equipment Directive (PED)
Electrical Certifications
CSA		LR 77954
Solar’s Applicable Engineering Specifications
ES 9-62	Ingestive Cleaning Solar Gas Turbine Engines
ES 2416	DC Supply Systems

© 2008 Solar Turbines Incorporated. All rights reserved. TPS250GS/908 - Preliminary

60