Turbomachinery Package Specification

Titan 250 Generator Set

 

 

•Fuel system

•Lubricating oil system

•Turbotronic™ 4 Control System

•Onskid electrical wiring

•Skid with drip pans

•Piping and manifolds

•Ancillary air inlet system

•Ancillary exhaust system

•Package enclosure (if specified) with:

−Ventilation system

−Fire detection and suppression system

−Combustible gas detection system

2.3.1Package Electrical System

The onskid package electrical system can be furnished to meet the following certification requirements:

•National Electrical Code (NEC)

•Canadian Electrical Code (CEC)

•Conformité Européenne (CE) Mark

•European Committee for Electrotechnical Standardization (CENELEC)

When supplied, the offskid control console, variable frequency drives, batteries, and battery charger are not approved for hazardous duty areas and must be installed in a nonhazardous area.

Three-Phase Motor Voltage

All three-phase motors and three-phase electrical components have the same voltage rating. Motor starters and contactors are not provided.

2.3.2Service Connections

The Titan 250 generator set is supplied with self-contained systems for starting, fuel, lube oil, and control. All service connections (Figure 2) are conveniently located on the outer edges of the skid.

© 2008 Solar Turbines Incorporated. All rights reserved.

TPS250GS/908 - Preliminary

7