
Turbomachinery Package Specification | Titan 250 Generator Set |
|
|
Certification is typically required to demonstrate offshore turbomachinery compliance with applicable rules for a fixed or mobile offshore installation. Solar can provide the necessary certification or assist the customer in obtaining certification. Involvement of one of the following certifying authorities is usually required:
•Det Norske Veritas (DNV)
•Bureau Veritas (BV)
•Lloyd’s Register (LR)
•American Bureau of Shipping (ABS)
15.1.8Deck Deflection LimitsThe package supporting deck structure must have sufficient stiffness to maintain alignment of the turbine and driven equipment under dynamic vessel motion. Table 13, lists the maximum allowable deflections measured between the furthest mounting points. With analysis, these limits may be extended through the use of gimbals or AVMs.
15.1.9Angular Displacement and AccelerationTable 15, Marinization Specifications, lists the maximum allowable angular displacement and acceleration limits for marine applications. The Basic Duty category is met by the standard package without any additional modification. Moderate Duty and Severe Duty categories require modification.
15.1.10Main and Auxiliary ServiceThe information provided in this section does not apply to equipment used in “Main and Auxiliary Service”. If equipment is intended for this type of service, please contact Solar Turbines Incorporated for guidance to ensure the correct application and certification requirements are met.
Table 13. Marinization SpecificationsSupporting Deck Deflection Limits
| Hogging and Sagging |
| 0.3833 mm/m (0.0046 in/ft) |
|
| ||
| Deck Twist |
|
| 0.0198°/m (0.006°/ft) |
|
| |
| Angular Displacement and Acceleration Limits |
|
|
|
| ||
|
|
| Basic Duty | Moderate | Severe Duty | ||
|
|
| Duty | Parallel | Perpendicular | ||
|
|
|
| ||||
| Maximum Permissible Angular Displacements |
|
|
|
| ||
| Dynamic: | Pitch / Period | 2° / 13 sec | 7.5° / 9 sec | 10° / 9 sec | 7.5° / 9 sec | |
| Roll / Period | 2° / 13 sec | 7.5° / 13 sec | 22.5° / 13 sec | 10° / 13 sec | ||
|
| ||||||
| Static: | Trim | 2° | 5° | 5° | 5° |
|
| List | 2° | 5° | 15° | 5° |
| |
|
|
| |||||
| Maximum Permissible Accelerations |
|
|
|
| ||
| Operating: |
| ± 0.1 g | ± 0.5 g | ± 1.0 g | ± 1.0 g | |
| Survival: |
| ± 0.5 g | ± 1.0 g | ± 1.5 g | ± 1.5 g |
© 2008 Solar Turbines Incorporated. All rights reserved. | TPS250GS/908 - Preliminary |
62