Configuring the Controller
To upgrade the controller’s firmware:
1Call Chaparral technical support for information about downloading the firmware updates.
See Chaparral Technical Support on page 9-1.
2From the computer connected to the controller, access the Disk Array Administrator software.
See Chapter 3, Accessing the Disk Array Administrator Software.
3From the System Menu, select Shutdown/Restart and press Enter. The system confirms that you want to shut down.
4Select Yes and press Enter.
The system confirms that it has shut down.
5Press Enter to reboot.
6While the controller reboots, hold down the space bar on your keyboard. The Flash Utility screen displays.
7Press the number on your keyboard that corresponds to the protocol you want to use to transfer the firmware upgrade file from your computer to the controller.
We recommend using the KERMIT protocol. The system shows that it is ready to use KERMIT.