Manuals / Chaparral / Computer Equipment / Network Card

Chaparral G5312/G7313, K5312/K7313 Managing SAF-TE Enclosures, Testing a Drive, To test a drive

Models: K5312/K7313 G5312/G7313

1 160

Download 160 pages 20.09 Kb

Page 119

Managing Disk Drives and Enclosures

Testing a Drive

This function issues a Test Unit Ready (TUR) command to the selected disk. This just tells you that the drive can respond, but it still may not be functioning properly.

To test a drive:

1From the System Menu, select Utilities Menu and press Enter. The Utilities Menu screen displays.

2Select Drive Utilities Menu and press Enter. The Drive Utilities Menu screen displays.

3Select Test Unit Ready and press Enter. The Select Drive screen displays.

4Select the drive you want and press Enter.

If the TUR was successful, TUR STATUS OK displays. If the TUR was not successful, a failure message displays.

5Press Esc to return to the Drive Utilities Menu.

Managing SAF-TE Enclosures

A SEP (SAF-TE Environmental Processor) is a SCSI device from which the RAID controller can inquire about environmental conditions such as temperature, power supply and fan status, and the presence or absence of disk drives. The RAID controller can also tell the SEP about RAID activities such as drive rebuilds and failed disk drives.

SAF-TE configuration settings are automatically enabled when G- and K-Series controllers are installed in an enclosure that contains a SEP. No changes are required to the default configuration settings to support SAF-TE.

You can control the following functions for SEP enclosures:

✁Change the SEP LUN (see page 8-12)

✁Change additional SEP settings (see page 8-14):

–Polling interval

–Temperature sensor status

8-11

Image 119

Chaparral G5312/G7313, K5312/K7313 manual Managing SAF-TE Enclosures, Testing a Drive, To test a drive

Contents

User’s Guide Page Technical Support CopyrightTrademarks ChangesCanadian Compliance Statement Contents Hardware Installation Monitoring System Status Managing Disk Drives and Enclosures Glossary K-Series User’s Guide Viii About This Guide IntroductionMotherboard Ultra2 Scsi Channels G-Series Product FeaturesConventions Motherboard CPU Subsystem G-SeriesMotherboard Disk Cache G-Series Battery Interface G-SeriesHardware Configuration and Management Support G-Series Motherboard Ultra2 Scsi Channels K-Series Onboard Connectors G-SeriesDaughterboard G-Series Motherboard CPU Subsystem K-SeriesMotherboard Disk Cache K-Series Integrated Battery Backup and Interface K-SeriesFibre Channel Connection K-Series Fibre Channel FeaturesHardware Configuration and Management Support K-Series Onboard Connectors K-SeriesElectrical G-Series SpecificationsSpecifications Physical G-SeriesEnvironmental G-Series 3shows the environmental specifications of the controllersBattery G-Series Electrical K-Series Physical K-SeriesEnvironmental K-Series 7shows the environmental specifications of the controllersBattery K-Series Chaparral Documents Reference DocumentsExternal Documents K-Series User’s Guide Connecting to the Fibre Channel Port Hardware InstallationConnecting the Controller Connecting to the Scsi PortTo connect to the Fibre Channel port Connecting to the RS-232 PortTo connect to the RS-232 port K-Series User’s Guide Setting Value Accessing the Disk Array Administrator SoftwareSettingValue Do this Navigating the Disk Array Administrator SoftwareSelect Function Disk Array Administrator Menu TreeChanging the Screen Display Menu tree K-Series User’s Guide Minimum Maximum RAID Level No. Drives Creating and Managing ArraysCreating Arrays To create an array Creating and Managing Arrays RAID Type screen displays Scsi ID K-Series User’s Guide Creating and Managing Arrays Viewing Array Status Managing ArraysTo view the status of an array To view the array statistics Viewing Array StatisticsCreating and Managing Arrays To reset array statistics Resetting Array StatisticsTo view drive status Viewing Drive StatusSelect Abort Initialization and press Enter Stopping the Array Initialization ProcessTo stop the array initialization process To verify an array Verifying an ArrayTo view verification status Viewing Verification StatusTo stop the verification process Reconstructing an ArrayRAID Level Number of Drives You Can Add Expanding Array CapacityTo expand an array To view expand status Viewing Expand StatusTo change the array LUN Changing the Array LUNTo change the array name Changing the Array NameTrusting an Array To trust an array To delete an array Deleting an ArrayDisplaying the Event Log Monitoring System StatusViewing One Event at a Time Viewing the Most Recent EventSelect View Event Log and press Enter To display one event at a timeTo capture the event log file Viewing a Whole Screen of EventsCapturing the Event Log File To display a whole screen of eventsGroup Field What displays Displaying Hardware and Configuration InformationLUN Capi SEP To display hardware information onlyPress Esc to return to the Utilities Menu To display hardware and configuration information Displaying Overall Statistics To access the general array statistics To access the read/write histogram To reset overall statistics Resetting Overall StatisticsManaging Dedicated Spares Managing SparesTo add a dedicated spare Adding a Dedicated SpareTo delete a dedicated spare drive Enabling Dynamic SparesDeleting a Dedicated Spare To enable dynamic spares To add a pool spare Managing the Spare PoolAdding a Spare to the Spare Pool Select Delete Pool Spare and press Enter Deleting a Spare from the Spare PoolTo delete a spare from the spare pool Select Display Pool Spares and press Enter Displaying the Spare PoolTo display the spare pool K-Series User’s Guide Rebooting the Controller Configuring the ControllerTo set the controller’s date Changing the Date and TimeTo shut down and restart the controller To set the controller’s time Understanding LUNs Configuring the Controller Changing the Controller’s Target ID and LUN Do this To change the controller’s target ID and LUNKeep the same Loop ID for the channel at all times To configure the channel Configuring the Scsi ChannelsK-Series User’s Guide 1shows an example of how you can use LUN zoning Working with LUN ZoningTo view known WWNs Viewing Known WWNsSelect Display Host List and press Enter Select Add or Name Host and press Enter Creating Names Aliases for Server WWNsTo create or change names for WWNs To set up LUN zoning Configuring LUN ZoningK-Series User’s Guide To change the sample rate Changing the Sample RateAlarm threshold What to do when the alarm sounds Changing the Alarm Mute SettingSoftware To enable or disable the alarmTo lock the cache setting Locking the Cache SettingTo change the battery setting Enabling and Disabling the BatteryChanging the Utility Priority Select Utility Priority and press Enter Rescanning All ChannelsTo change Utility priority To rescan all channels Pausing I/OTo pause I/O Restoring Default SettingsUpgrading the Controller’s Firmware To restore the default settingsSelect Restore Defaults and press Enter Upgrading FirmwareSee Chaparral Technical Support on To upgrade the controller’s firmwareK-Series User’s Guide Managing Disk Drives Managing Disk Drives and EnclosuresDisplaying All Drives Displaying Drive InformationTo display all drives To view drive status Clearing Metadata from a DriveTo clear metadata from a drive To change the write-back cache settingEnabling and Disabling Write-back Cache K-Series User’s Guide To display disk cache status Displaying Disk Cache StatusEnabling and Disabling Smart Changes To enable or disable Smart changesTo blink a drive Blinking a Drive LEDTo take down a drive Taking Down a DriveTo test a drive Testing a DriveManaging SAF-TE Enclosures To change the SEP LUN Changing the SEP LUNDo this To change the SEP settings Changing the Additional SEP SettingsManaging Disk Drives and Enclosures K-Series User’s Guide Chaparral Technical Support TroubleshootingTerminal Emulator and COM Port Problems Problem Screen continuously puts out garbage charactersProblem Array is much smaller than it should be Array ProblemsProblem Screen is updated, but won’t respond to keystrokes To change the backoff percentage Host Scsi Channel ProblemsProblem The host Scsi Bios scan hangs Problems During Bootup Device Scsi Channel ProblemsProblem The system hangs at CTsrv starting Controller ProblemsProblem Controller failed the onboard memory test Problem One of the Post diagnostic test failedProblem The controller reports a Battery error Problem The controller reports a Sdram memory errorCritical Event Definition Recommended ActionWarn ErrorsDisk Errors Using the Loader Diagnostics MenuUsing the Loader Utility Menu Understanding Scsi ErrorsDescriptions Sense Key DescriptionDisk Channel Errors Error Code Description Voltage and Temperature Errors and Warnings K-Series User’s Guide RAID 0 Striped Disks Array BasicsArray Types RAID RAID 1, RAID 1/O Mirrored DisksArray Basics Min No Description Strengths Weaknesses Level Drives Volume SetsComparing RAID Levels RAID 3 RAID Mixing Disks on Different RAID Controller Channels Glossary K-Series User’s Guide Glossary K-Series User’s Guide Glossary K-Series User’s Guide Index K-Series User’s Guide Index K-Series User’s Guide Index Scsi ID Index K-Series User’s Guide