Manuals / Chaparral / Computer Equipment / Network Card

Chaparral G5312/G7313 manual Enabling and Disabling the Battery, To change the battery setting

Models: K5312/K7313 G5312/G7313

1 160

Download 160 pages 20.09 Kb

Page 101

Configuring the Controller

3Select Cache Lock and press Enter.

The Cache Lock screen displays. The current setting is marked with an * next to it.

4Select the option you want and press Enter.

Enabling and Disabling the Battery

If you are not using a battery in your controller, the controller will sound an alarm. To eliminate the alarm, you can disable the battery. The default setting is battery enabled.

Note: You should only disable the battery if you are running the controller with an uninterruptable power supply (UPS), so that you will not lose power to the controller.

If you disable the battery, the controller will not give any warnings, nor will it disable the write-back cache.

If you change this setting, you must reboot the controller for the change to take effect.

To change the battery setting:

1From the System Menu, select Configuration Menu and press Enter. The Configuration Menu screen displays.

2Select Option Configuration and press Enter. The Option Configuration screen displays.

7-21

Image 101

Chaparral G5312/G7313, K5312/K7313 manual Enabling and Disabling the Battery, To change the battery setting

Contents

User’s Guide Page Trademarks CopyrightChanges Technical SupportCanadian Compliance Statement Contents Hardware Installation Monitoring System Status Managing Disk Drives and Enclosures Glossary K-Series User’s Guide Viii About This Guide IntroductionConventions Product FeaturesMotherboard CPU Subsystem G-Series Motherboard Ultra2 Scsi Channels G-SeriesMotherboard Disk Cache G-Series Battery Interface G-SeriesHardware Configuration and Management Support G-Series Daughterboard G-Series Onboard Connectors G-SeriesMotherboard CPU Subsystem K-Series Motherboard Ultra2 Scsi Channels K-SeriesMotherboard Disk Cache K-Series Integrated Battery Backup and Interface K-SeriesHardware Configuration and Management Support K-Series Fibre Channel FeaturesOnboard Connectors K-Series Fibre Channel Connection K-SeriesSpecifications SpecificationsPhysical G-Series Electrical G-SeriesEnvironmental G-Series 3shows the environmental specifications of the controllersBattery G-Series Electrical K-Series Physical K-SeriesEnvironmental K-Series 7shows the environmental specifications of the controllersBattery K-Series Chaparral Documents Reference DocumentsExternal Documents K-Series User’s Guide Connecting the Controller Hardware InstallationConnecting to the Scsi Port Connecting to the Fibre Channel PortTo connect to the Fibre Channel port Connecting to the RS-232 PortTo connect to the RS-232 port K-Series User’s Guide Setting Value Accessing the Disk Array Administrator SoftwareSettingValue Do this Navigating the Disk Array Administrator SoftwareSelect Function Disk Array Administrator Menu TreeChanging the Screen Display Menu tree K-Series User’s Guide Minimum Maximum RAID Level No. Drives Creating and Managing ArraysCreating Arrays To create an array Creating and Managing Arrays RAID Type screen displays Scsi ID K-Series User’s Guide Creating and Managing Arrays Viewing Array Status Managing ArraysTo view the status of an array To view the array statistics Viewing Array StatisticsCreating and Managing Arrays To reset array statistics Resetting Array StatisticsTo view drive status Viewing Drive StatusSelect Abort Initialization and press Enter Stopping the Array Initialization ProcessTo stop the array initialization process To verify an array Verifying an ArrayTo view verification status Viewing Verification StatusTo stop the verification process Reconstructing an ArrayRAID Level Number of Drives You Can Add Expanding Array CapacityTo expand an array To view expand status Viewing Expand StatusTo change the array LUN Changing the Array LUNTo change the array name Changing the Array NameTrusting an Array To trust an array To delete an array Deleting an ArrayDisplaying the Event Log Monitoring System StatusViewing One Event at a Time Viewing the Most Recent EventSelect View Event Log and press Enter To display one event at a timeCapturing the Event Log File Viewing a Whole Screen of EventsTo display a whole screen of events To capture the event log fileGroup Field What displays Displaying Hardware and Configuration InformationLUN Capi SEP To display hardware information onlyPress Esc to return to the Utilities Menu To display hardware and configuration information Displaying Overall Statistics To access the general array statistics To access the read/write histogram To reset overall statistics Resetting Overall StatisticsManaging Dedicated Spares Managing SparesTo add a dedicated spare Adding a Dedicated SpareTo delete a dedicated spare drive Enabling Dynamic SparesDeleting a Dedicated Spare To enable dynamic spares To add a pool spare Managing the Spare PoolAdding a Spare to the Spare Pool Select Delete Pool Spare and press Enter Deleting a Spare from the Spare PoolTo delete a spare from the spare pool Select Display Pool Spares and press Enter Displaying the Spare PoolTo display the spare pool K-Series User’s Guide Rebooting the Controller Configuring the ControllerTo set the controller’s date Changing the Date and TimeTo shut down and restart the controller To set the controller’s time Understanding LUNs Configuring the Controller Changing the Controller’s Target ID and LUN Do this To change the controller’s target ID and LUNKeep the same Loop ID for the channel at all times To configure the channel Configuring the Scsi ChannelsK-Series User’s Guide 1shows an example of how you can use LUN zoning Working with LUN ZoningTo view known WWNs Viewing Known WWNsSelect Display Host List and press Enter Select Add or Name Host and press Enter Creating Names Aliases for Server WWNsTo create or change names for WWNs To set up LUN zoning Configuring LUN ZoningK-Series User’s Guide To change the sample rate Changing the Sample RateAlarm threshold What to do when the alarm sounds Changing the Alarm Mute SettingSoftware To enable or disable the alarmTo lock the cache setting Locking the Cache SettingTo change the battery setting Enabling and Disabling the BatteryChanging the Utility Priority Select Utility Priority and press Enter Rescanning All ChannelsTo change Utility priority To rescan all channels Pausing I/OTo pause I/O Restoring Default SettingsSelect Restore Defaults and press Enter To restore the default settingsUpgrading Firmware Upgrading the Controller’s FirmwareSee Chaparral Technical Support on To upgrade the controller’s firmwareK-Series User’s Guide Managing Disk Drives Managing Disk Drives and EnclosuresDisplaying All Drives Displaying Drive InformationTo display all drives To view drive status Clearing Metadata from a DriveTo clear metadata from a drive To change the write-back cache settingEnabling and Disabling Write-back Cache K-Series User’s Guide To display disk cache status Displaying Disk Cache StatusEnabling and Disabling Smart Changes To enable or disable Smart changesTo blink a drive Blinking a Drive LEDTo take down a drive Taking Down a DriveTo test a drive Testing a DriveManaging SAF-TE Enclosures To change the SEP LUN Changing the SEP LUNDo this To change the SEP settings Changing the Additional SEP SettingsManaging Disk Drives and Enclosures K-Series User’s Guide Terminal Emulator and COM Port Problems TroubleshootingProblem Screen continuously puts out garbage characters Chaparral Technical SupportProblem Array is much smaller than it should be Array ProblemsProblem Screen is updated, but won’t respond to keystrokes To change the backoff percentage Host Scsi Channel ProblemsProblem The host Scsi Bios scan hangs Problems During Bootup Device Scsi Channel ProblemsProblem Controller failed the onboard memory test Controller ProblemsProblem One of the Post diagnostic test failed Problem The system hangs at CTsrv startingProblem The controller reports a Battery error Problem The controller reports a Sdram memory errorCritical Event Definition Recommended ActionWarn ErrorsUsing the Loader Utility Menu Using the Loader Diagnostics MenuUnderstanding Scsi Errors Disk ErrorsDescriptions Sense Key DescriptionDisk Channel Errors Error Code Description Voltage and Temperature Errors and Warnings K-Series User’s Guide RAID 0 Striped Disks Array BasicsArray Types RAID RAID 1, RAID 1/O Mirrored DisksArray Basics Min No Description Strengths Weaknesses Level Drives Volume SetsComparing RAID Levels RAID 3 RAID Mixing Disks on Different RAID Controller Channels Glossary K-Series User’s Guide Glossary K-Series User’s Guide Glossary K-Series User’s Guide Index K-Series User’s Guide Index K-Series User’s Guide Index Scsi ID Index K-Series User’s Guide