Configuring the Controller
Include All
Include Listed
Exclude All
Exclude Listed
Whether you use an include or exclude list depends on your needs. You may want to determine which list would be shorter and create the shorter list.
If you have changed the LUN zoning, the system confirms that you want to make the change.
5Select Yes and press Enter to make the changes. The system confirms that the changes are made.
6Press Esc to return to the LUN Zoning screen.
Changing the Sample Rate
You can set how often the controller samples data when updating status screens (disk and array). The default is one second.
To change the sample rate:
1From the System Menu, select Configuration Menu and press Enter. The Configuration Menu screen displays.
2Select New Sample Rate and press Enter. The New Sample Rate screen displays.
3Enter the sample rate and press Enter.