Cisco Systems 1.1 manual Configuring Settings, Viewing Video Content in Full-Screen Mode

Chapter 2 Using DMPDM

Configuring Settings

Viewing Video Content in Full-Screen Mode

To fill the screen on your DMP display with only the video content plane, click .

Note You can show video content from any of three possible sources. See:

•Showing or Stopping Video Content from a UDP Multicast Stream, page 2-13.

•Showing or Stopping Video Content from an HTTP URL, page 2-14.

•Showing or Stopping Video Content from a File Stored on Your DMP, page 2-14.

The HTML content plane is not shown.

Viewing HTML Content in Full-Screen Mode

To fill the screen on your DMP display with only the HTML content plane (and show HTML or other

browser-friendly content), click . See Specifying the URL to Show on the HTML Content Plane, page 2-16.

The video content plane is not shown.

Note To stop the full-screen presentation of browser content, click Video.

Configuring Settings

DMPDM options in the “Settings” area are described in these topics:

•Adjusting Basic Network Settings, page 2-2

•Adjusting Embedded Browser Settings, page 2-4

•Adjusting DMP Display Attributes Settings, page 2-6

•Enabling or Disabling Centralized Management, page 2-9

•Adjusting the Placement and Proportions of Content on a DMP Display, page 2-10

•Enabling or Disabling Types of Access to Your DMP, page 2-11

•Managing Permissions for Internal Storage, page 2-12

Adjusting Basic Network Settings

		You can change simple network settings for your DMP.
	Step 1	In the Settings list, click Basic.
	Step 2	Enter or edit the required values, as described in Table 2-1.
	Step 3	To confirm that you are satisfied with the entries or changes that you made and to record them in volatile
		memory, click Apply.
	User Guide for Cisco Digital Media Player Device Manager 1.1
2-2		OL-13985-01