2-10
User Guide for Cisco Digital Media Player Device Manager 1.1
OL-13985-01
Chapter 2 Using DMPDM
Configuring Settings
Adjusting the Placement and Proportions of Content on a DMP Display
You can adjust the proportions, horizontal position, and vertical position of content that you show on a
DMP display.
Step 1 In the Settings list, click DMP Display Dimensions.
Step 2 Enter or edit the required values, as described in Tabl e 2-5.
Step 3 To confirm that you are satisfied with the entries or changes that you made and to record them in volatile
memory, click Apply.
After you click Apply, the entries or changes take effect. However, the previously defined values will
return the next time that your DMP restarts.
Step 4 (Optional) To put all changed values into effect permanently, so that they persist even after your DMP
restarts, select Administration > Save Configuration and, when the Save Configuration page appears,
click Save.
Tab l e 2-4 GUI Elements on the Centralized Management Page
Element Description
Centralized Management
DMM-DSM Server
Timeout (in seconds)
The maximum number of seconds that your DMP will wait for a response from the DMM appliance
that you identify in the DMM Host text box.
DMM Appliance IP
Address
The IP address or routable DNS name of the one DMM appliance that your DMP trusts.
Tab l e 2-5 GUI Elements on the DMP Display Dimensions Page
Element Description
DMP Display Dimensions
DMP Display X Axis
(abscissa) Center Point
(in relative units)
The absolute center point of your DMP display, as measured from left to right (on the x-axis),
in pixels.
Reduce the value to move displayed content closer to the left edge.
Increase the value to move displayed content closer to the right edge.
DMP Display Y Axis
(ordinate) Center Point
(in relative units)
The absolute center point of your DMP display, as measured from top to bottom (on the y-axis),
in pixels.
Reduce the value to move displayed content closer to the top edge.
Increase the value to move content closer to the bottom edge.