Manuals / Cisco Systems / Computer Equipment / Network Router

Cisco Systems 700 manual Overview, Supported Protocols

Models: 700

1 87

Download 87 pages 6.75 Kb

Page 11

C H A P T E R 1

Overview

Cisco 700 series routers connect small office Ethernet LANs to corporate networks through Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) lines. After configuration, the router automatically routes packets to and from remote destinations using IP or Internetwork Packet Exchange (IPX).

The Cisco 700 series router is a fixed configuration router. The router operating system is called Cisco IOS-700 software and is unique to the Cisco 700 series router.

Supported Protocols

The Cisco 700 series routers support the following protocols:

•

•

•

•

•

•

•

•

•

•

•

IP

IPX

Internet Protocol Control Protocol (IPCP)

Internet Control Message Protocol (ICMP)

Internetwork Packet Exchange Control Protocol (IPXCP)

Point-to-Point Protocol (PPP)

Bridge Control Protocol (BCP)

Multilink PPP (MLPPP)

Address Resolution Protocol (ARP)

Service Advertisement Protocol (SAP)

Password Authentication Protocol (PAP)

Overview 1-1

Image 11

Cisco Systems 700 manual Overview, Supported Protocols

Contents

Cisco 700 Series Router Configuration Guide Page N T E N T S Chapter Using Chap Chapter Configuring Dhcp Relay, Dhcp Server, and PAT Token Caching A-2 About This Manual Related Documentation Conventions Set systemname systemname Supported Protocols OverviewSoftware Images Administrative Configuration Options 4Cisco700 Series Router Command Reference Profile Overview Using Profiles with Cisco 700 Series RoutersProfiles and Connections System and Profile ParametersProfile Mode Parameter Set System Mode Parameter SetPermanent Profiles Lists the parameters that can be configured in a profileHost set user tomd Displaying Profile ConfigurationsCreating and Modifying Profiles Removing Profile-Based ValuesChanging Profile Names HostProfile reset user tomdIncoming Calls Deleting ProfilesOutgoing Calls 8Cisco700 Series Router Configuration Guide Basic Configuration Concepts Basic ConfigurationsLANs and WANs Bridges and RoutersProfiles Show config Current ConfigurationRemote and Central Sites Host show configSet def Password and SecretStarting Point Additional ReferenceSet autodetection on Setting Spid Autodetection North America onlySet switch dms Setting SPIDs Manually North America onlyBridging Example Bridging with a Cisco 700 Series RouterCisco 700 Series Router Bridging Instructions Routing IP with a Cisco 700 Series Router to an ISPConnecting to an ISP-Example Configuration Set user isp Set number Routing IP to a Central SiteRouting a Cisco 700 Series Router to an ISP Instructions Set system 764 cd lan Set ip addressRouting IP to a Central Site-Example Configuration Set system remote765 set multidestination on cd LAN Central Site IP Routing Command SummarySet ppp auth in chap set ppp secret host cd lan Routing IP and IPX On-DemandRouting IP and IPX On-Demand-Example Configuration Cd LAN On-Demand IP and IPX Routing with PPP InstructionsSet bridging off Central Site On-Demand IP and IPX Routing with PPP Commands18Cisco 700 Series Router Configuration Guide Using Chap Spid Detection North America only IP Static Routing and Callback with Chap AuthenticationSet ip rip version 2 set user Remote Cisco 765 Command SummarySet switch 5ess Set ip rip update off set timeoutIP Static Routing with Chap Authentication and MLP Demand 2 threshold 32 duration 5 set active Reboot Set ip rip update periodic set user Set ppp secret clientIP Static Routing with PAP Authentication IP Static Routing with PAP Authentication and MLPSet bridging off set timeout 360 set active reboot IP Unnumbered Static Routing and Chap with MLP IP Unnumbered Routing and Chap Authentication with MLPSet ppp secret host cd lan IP Static and IPX Static Routing with PPP IP Static and IPX Static Routing with Chap and MLPSet multidestination on Set ip rip update periodic set user4500 IPX Static Routing with Chap and MLPSet ipx rip update periodic set user Set ppp multilink off Multilink PPP EncapsulationDynamic Routing Protocols Bridging to a Router Running Cisco IOS Software 16Cisco700 Series Router Configuration Guide Configuring Dhcp Relay, Dhcp Server, and PAT Dhcp Server Application Notes Dhcp DescriptionPAT Application Notes PAT DescriptionDhcp Relay Application Notes Set ip framing none Ipcp DescriptionIpcp Address Negotiation Application Notes PPP Ipcp Negotiation Example Cisco 765 Series Router CommandsSet system Verify the ConfigurationDhcp Relay with Ipcp Negotiation Example Dhcp Server with Ipcp Negotiation Example Set user Set dhcp serverSet dhcp gateway primary 172.168.1.1 cd lan PAT with Ipcp Single-Destination Negotiation PAT with Ipcp Single-Destination Negotiation ExampleSet system Set ip pat po ftp 10.0.0.2 cd lan Dhcp Server with PAT and Ipcp Single-Destination Negotiation Set active Dhcp server Cisco Isdn network Set ip netmask 255.255.255.0 set ip pat on Verify the Configuration 16Cisco700 Series Router Configuration Guide Configuring Remote Capi Capi and RVS-COM Supported Applications Remote Capi Router CommandsSupported D-Channel Protocols Set rcapi on Set dir Configuring the Cisco 700 Router as an Rcapi ServerRcapi Command Summary Local-router show rcapi status 6Cisco700 Series Router Configuration Guide Token Card and Cisco Secure Authentication Support Token Caching Figure A-2 PAP Client Packet 4Cisco700 Series Router Configuration Guide D E ISP Ipxcp RIP ARP BCP Chap Dhcp Icmp Ipcp Ipxcp ISDN-DCP Mlppp PAP PAT