Cisco Systems 700 manual Software Images

Software Images

•

•

•

•

•

•

•

•

•

Trivial File Transfer Protocol (TFTP server)

Simple Network Management Protocol (SNMP)

Routing Information Protocol (RIP) for IP and IPX

Triggered RIP for IP

Challenge Handshake Authentication Protocol (CHAP)

Dynamic Host Configuration Protocol (DHCP)

Port Address Translation (PAT)

Remote Common Application Programmers Interface (RCAPI)

ISDN Device Control Protocol (ISDN-DCP)

Software Images

The Cisco 700 Series routers run a proprietary Cisco software (Cisco IOS-700 software) image, which is different than traditional Cisco IOS software. The image you use varies, depending on the region in which the router is used and what feature set you desire. The image name, for example, c760-in.r-TPH.43-1.bin, designates the region and features. The regions are as follows:

•

•

•

•

•

US for use in North America

NET3 for use in Europe

TR6 for use in Germany

INS for use in Japan

TPH for use in Australia

The features are indicated as follows:

•Internet Ready (IP only, 30 users with data compression on) images have a "b" designation.

•Internet Ready X.25 (IP only, 30 LAN devices, compression, X.25) images have a "bxd" designation.

1-2Cisco700 Series Router Command Reference