Cisco Systems 700 manual Set system, Set active

DHCP Server and PAT with IPCP Single-Destination Negotiation Example

Cisco 765 Series Router Commands

Following are the commands for configuring the remote Cisco 765 series router for PAT with IPCP single-destination negotiation with a Cisco 4500 router:

set system 765

set ppp secret client set ppp password client set dhcp server

set dhcp address 172.168.99.2 128 set dhcp netmask 255.255.255.0

set dhcp gateway primary 172.168.99.1 set ip pat porthandler ftp 172.168.99.3 cd lan

set ip routing on

set ip address 172.168.99.1 set ip netmask 255.255.255.0 set user 4500

set 1 number phone_number set 2 number phone_number set ip routing on

set ip route destination 0.0.0.0/0 gateway 0.0.0.0 set ip address 0.0.0.0

set ip netmask 0.0.0.0 set ip pat on

set active

For detailed information regarding the commands listed here, refer to the Cisco 700 Series Router Command Reference.

Verify the Configuration

When a demand call is made, you can use the show ip config all and show ip route all commands to see the IPCP negotiation address. You can also use the show dhcp config and show ip pat commands to verify the configuration.

5-12Cisco700 Series Router Configuration Guide