Cisco Systems 700 manual Set system Set ip pat po ftp 10.0.0.2 cd lan

PAT with IPCP Single-Destination Negotiation Example

Cisco 765 Series Router Commands

Following are the commands for configuring the remote Cisco 765 series router for PAT with IPCP single-destination negotiation with a Cisco 4500 router:

set system 765

set ip pat po ftp 10.0.0.2 cd lan

set ip address 10.0.0.1 set ip netmask 255.0.0.0 set ip routing on

set user 4500 set active

set 1 number phone_number set 2 number phone_number set ip routing on

set ip rip version 2 set ip rip receive v2 set ip pat on reboot

For detailed information regarding the commands listed here, refer to the Cisco 700 Series Router Command Reference.

Verify the Configuration

When a demand call is made, you can use the show ip config all and show ip route all commands to see the IPCP negotiation address.

You can use the show ip pat command to see the services returned by PAT.

5-10Cisco700 Series Router Configuration Guide