C H A P T E R 4
Using CHAP
This chapter contains configuration examples for connecting a Cisco 700 series router to a router running Cisco IOS software. In these examples, the remote router is a Cisco 765 series router, and the central site router is a Cisco 4500 series router. Any Cisco 700 series router can be used in place of the remote Cisco 765 series router. Any router running Cisco IOS software can replace the central site Cisco 4500 series router.
In these examples, the Cisco 4500 series router
ISDN Primary Rate Interface (PRI). Depending on the router model used at the central site, the serial interface might be a different type.
In addition, this chapter lists several interoperability issues that exist between Cisco IOS software and Cisco 700 series routers. These issues must be considered if you are connecting your Cisco 700 series router to a router running Cisco IOS software.
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
IP Static Routing and Callback with CHAP Authentication
IP Static Routing with CHAP Authentication and MLP
IP Static Routing with PAP Authentication and MLP
IP Unnumbered Static Routing and CHAP with MLP
IP Static and IPX Static Routing with CHAP and MLP
IPX Static Routing with CHAP and MLP
Multilink PPP Encapsulation
Dynamic Routing Protocols
Bridging to a Router Running Cisco IOS Software
Using CHAP
