Remote Cisco 765 Command Summary
Remote Cisco 765 Command Summary
Following is the command summary for configuring the remote Cisco 765 series router for IP static routing and callback with CHAP authentication:
set switch 5ess
set 1 dir directory_number set 2 dir directory_number set system 765
set ppp authentication incoming chap set ppp secret client
set multidestination on cd lan
set ip address 192.168.147.9 set ip netmask 255.255.255.248 set ip routing on
set ip rip update periodic set ip rip receive v2
set ip rip version 2 set user 4500
set ppp secret client set ppp secret host
set ip route destination 0.0.0.0 gateway 172.16.125.1 propagate on set ip address 172.16.125.7
set ip netmask 255.255.255.0 set ip routing on
set ip framing none
set ppp callback request always set 1 ringback number
set 2 ringback number set number 5558011 set bridging off
set ip rip update off set timeout 360
set active reboot
Multilink PPP is enabled by default. If the Cisco 700 series router is dialing into a host that does not support multilink PPP or that does not have multilink PPP enabled, the Cisco 700 series router might report a misconfiguration. This is most commonly seen when the Cisco 700 series router is connected to equipment from Ascend.
Using CHAP
