Cisco Systems 700 manual Set ip rip update periodic set user Set ppp secret client

Remote Cisco 765 Command Summary

Remote Cisco 765 Command Summary

Following is the command summary to configure the remote Cisco 765 series router for IP static routing with CHAP and MLP:

set switch 5ess

set 1 dir directory_number set 2 dir directory_number set system 765

set multidestination on set ppp multilink on

set ppp authentication incoming chap set ppp authentication outgoing chap cd lan

set ip address 192.168.147.9 set ip netmask 255.255.255.248 set ip routing on

set ip rip update periodic set user 4500

set ppp secret client

set ip address 172.16.125.7 set ip netmask 255.255.255.0 set ip routing on

set ip framing none

set ip route destination 0.0.0.0 gateway 172.16.125.1 propagate on set number 5558011

set bridging off

set ip rip update off set ppp secret host set timeout 360

demand 2 threshold 32 duration 5 set active

reboot

Note The set ppp authentication outgoing chap command in this example is not recommended when connecting to Ascend 4000 or NAS routers.

For detailed information regarding the commands listed here, refer to the Cisco 700 Series Router Command Reference.

Using CHAP 4-5