Cisco Systems 700 manual PPP Ipcp Negotiation Example, Cisco 765 Series Router Commands

PPP IPCP Negotiation Example

PPP IPCP Negotiation Example

This section describes how to configure a remote Cisco 700 series router for PPP IPCP negotiation to a central site router, such as a Cisco 4500 series router, that is running Cisco IOS software.

Figure 5-1 is an illustration of the configuration used in this example.

Figure 5-1 PPP IPCP Negotiation

ISDN network

Cisco 765 Cisco 4500

H9230

Cisco 765 Series Router Commands

Following are the commands for configuring the remote Cisco 765 series router for point-to-point IPCP negotiation with a Cisco 4500 router:

set switch 5ess

set 1 dir directory_number set 2 dir directory_number set system 765

set user 4500

set ppp secret client set ppp password client set active

set 1 number phone_number set 2 number phone_number set ip routing on

set ip route destination 0.0.0.0/0 gateway 0.0.0.0 set ip rip version 2

set ip rip receive v2 set ip rip update linkup reboot

For detailed information regarding the commands listed here, refer to the Cisco 700 Series Router Command Reference.

Configuring DHCP Relay, DHCP Server, and PAT 5-5