Cisco Systems 700 Routing IP and IPX On-Demand, Set ppp auth in chap set ppp secret host cd lan

Routing IP and IPX On-Demand

Following is the command summary for configuring the central site Cisco 700 series router for on-demand IP routing with PPP:

set system central766 set multidest on

set ppp auth in chap set ppp secret host cd lan

set ip address 172.15.1.100 set ip netmask 255.255.255.0 set ip routing on

set ip rip update periodic set user remote765

set ppp auth out chap set ppp secret client set bridging off

set ip address 10.48.125.4 set ip netmask 255.255.255.0 set ip routing on

set ip rip update demand

set ip route destination 0.0.0.0 gateway 10.48.125.7 set ip rip version 1

set 1 number 5553693 set 2 number 5553694 set timeout 360

set active reboot

The set ip rip update demand command is only applicable to the Cisco 700 series router.

If you are being charged for each connection, you can use the set timeout command to set the timeout to zero. Doing so maintains your connection and minimizes the number of fees.

Routing IP and IPX On-Demand

This section describes how to configure the remote Cisco 765 router and the central site Cisco 765 router for on-demand IP and IPX routing using PPP.

Figure 3-4 illustrates the configuration used in this example.

3-14Cisco 700 Series Router Configuration Guide