Cisco Systems 78-16356-01 manual Cabling a Modem to the GSS

Appendix B Connecting a Modem to the GSS Console Port

Cabling a Modem to the GSS

Cabling a Modem to the GSS

After you configure the modem, perform the following steps to connect a modem to the GSS:

1.Unplug the flat rolled RJ-45-to-RJ-45 cable from the terminal adapter on the PC and connect the cable to the console port on the GSS (Figure B-2).

Figure B-2 Rear Panel Ports and Connectors

1

2

119605

3 4

1	AC power receptacle	3	RJ-45 Ethernet 1 connector with
			10/100/1000-Mbit/s operation
2	Console/serial connector	4	RJ-45 Ethernet 0 connector with
			10/100/1000-Mbit/s operation

	Cisco Global Site Selector 4491 Hardware Installation Guide
B-4	78-16356-01