Chapter 3 Installing the GSS

Installing Your GSS

Attaching the Telescopic Rails to the Rack Assembly

To attach the telescopic rails to the four-post rack assembly:

1.Extend the rail (1) as far as it will go, as shown in Figure 3-2.

2.Press the green spring plate (2) on the extended telescopic rail and remove the inner rail. Set the rail aside for attachment to the GSS (see the “Inserting the GSS into the Rack” section).

Figure 3-2 Removing the Inner Server Rail

1

119961

 

2

 

Cisco Global Site Selector 4491 Hardware Installation Guide

3-6

78-16356-01

Page 48
Image 48
Cisco Systems 78-16356-01 manual Attaching the Telescopic Rails to the Rack Assembly