Cisco Systems 78-16356-01 manual Ports and Connectors, Console Port Ethernet Connectors

Chapter 1 Introduction

Ports and Connectors

Ports and Connectors

The GSS supports the following port connectors on the rear of the chassis:

•Console Port

•Ethernet Connectors

Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.

Console Port

The GSS has one standard RS-232 serial port located on the rear panel that operates as the console port. The integrated serial port uses a 9-pin male D-shell connector. Figure 1-4shows the pin number assignments for the 9-pin port.

Refer to Table 1-3for the console port connector pinouts.

Figure 1-4 Console Port Connector Pin Numbers

1

5

6 9

119657

	Cisco Global Site Selector 4491 Hardware Installation Guide
1-6	78-16356-01