
Chapter 3 Installing the GSS
Installing Your GSS
6.Position and align the back end of the outer telescopic rail with the right side of the rack. Ensure that the back end of the rail is aligned with the front end and that it is flush with the rack post.
7.Attach the back end of the rail to the right side of the rack, as shown in Figure
Note Racks that contain tapped mounting holes do not require the cage nuts (3) shown in Figure
Figure 3-6 Attaching Back Rail to the Right Side of the Rack
3
1
2
119963
1
2
Round head screw and washer | 3 Cage nut |
Right outer telescopic
| Cisco Global Site Selector 4491 Hardware Installation Guide |