Cisco Systems 78-16356-01 manual Table B-2 Console Port Default Settings

Appendix B Connecting a Modem to the GSS Console Port

Cabling a Modem to the GSS

2.Ensure that the settings on the remote console match the GSS default settings specified in Table B-2.

Table B-2 Console Port Default Settings

Parameters	Default Settings
Baud	9600
Data Bits	8
Parity	None
Stop Bits	1
Terminal Type	VT100/ANSI
Flow Control	None

Note When you remotely log in to the GSS through a modem, ensure that you log out before disconnecting from the session. Use the exec-timeouttimeout command to set the maximum amount of time that the console session can be idle on the GSS before it logs out. By default, the timeout is 150 minutes.

	Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01		B-5