7193 Owner’s Guide | Diagnostics |
Setting Data Error and Data Buffer options
This function allows you to select the handling of data reception errors
Caution: The DIP switches are set at the factory to predetermined settings and should generally not be changed. If you must change the settings, do so carefully to avoid changing other functions. Run the print test to see what the current selections are for this function. See “Testing The Printer” On Page 23.
1.Turn the power off.
2.Turn the printer over and note what the current DIP switch settings are.
3.Set the switches to the settings in the table you want for data reception errors and the data buffer.
Switch 1 | Switch 2 | Switch 3 | Switch 4 | Switch 5 | Switch 6 | Option |
On | Off | On | Off | Off | Off | “?” for Data Errors1, 2 |
On | Off | On | Off | Off | On | Ignore Data Errors2 |
On | Off | On | Off | On | Off | 4K Byte Data Buffer1, |
|
|
|
|
|
| 3 |
On | Off | On | Off | On | On | One Line Data Buffer |
1Default
Choose one of the Data Errors options and one of the Data Buffer options.
4.Turn the power back on to enter the settings into the EEROM. The On Line light (green) blinks.
5.Turn the power off.
6.Set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the
May 1996
