Commands | 7193 Owner’s Guide |
Select Pitch (Column Width)
Selects the character pitch for a print line. It is valid only at the beginning of a line. Standard and compressed pitches cannot be used together on the same line. See “Appendix B” for a description of both pitches.
Hex | Decimal | ASCII | Value of n | Default | |
1B 16 n | 27 22 n | ESC SYN n | 0 | = Standard Pitch | 0 |
|
|
| 1 | = Compressed Pitch |
|
Set Print Mode
Selects the print mode: standard, compressed, double high, or double wide. See “Appendix B” for a description of standard and compressed character pitches.
Hex | Decimal | ASCII | Value of m | Default | |
1B 21 m | 27 33 m | ESC ! m | See Next Table | 0 |
|
Value of m |
|
|
|
|
|
Bit | Function | 0 |
| 1 |
|
Bit 01 | Pitch | Standard Pitch2 | Compressed Pitch | ||
|
| 44 Col/Line, 15 CPI (Rec) | 56 Col/Line, 19 CPI (Rec) | ||
|
| 80 Col/Line, 17.1 CPI (Slip) | |||
|
| 66 Col/Line, 13.9 CPI (Slip) | |||
Bit 4 | Double | Canceled |
| Set | |
| High3 |
|
|
|
|
Bit 5 | Double | Canceled |
| Set | |
| Wide |
|
|
|
|
1Bit 0 is ignored unless it is at begining of line. Bits 1, 2, 3, 6, 7 are not used.
2Standard and compressed pitch cannot be used together in the same line. 3Cannot be used together with normal height in same line.
74 | May 1996 |
