M-S Cash Drawer 7193 manual Full Knife Cut, Partial Knife Cut, Generate Tone, Set Column

Commands 7193 Owner’s Guide

Full Knife Cut

This command is implemented the same as Partial Knife Cut (1A/1B 6D).

Hex	Decimal	ASCII
19	25	EM
1B 69	27 105	ESC i

Partial Knife Cut

Partially cuts the receipt, leaving .20 inch (5 mm) of paper. The length of the cut can be changed through the DIP switches. See “Setting Partial Cut Distance” in the “Diagnostics” chapter. The cut edge is 108 dot rows or .71 inch (18 mm) above the print station. It is valid only at the beginning of a line.

Hex	Decimal	ASCII
1A	26	SUB
1B 6D	27 109	ESC m

Generate Tone

Generates an audible tone.

Hex	Decimal	ASCII
1B 07	27 7	ESC BEL

Set Column

Prints the first character of the next print line in column n. It must be sent for each line not printed at column one. The value of n is set to one after each line. It cannot be used with Single- or Double-Density graphics.

Hex	Decimal	ASCII	Value of n
1B 14 n	27 20 n	ESC DC4 n	1-44	(Standard Pitch)
			1-56	(Compressed pitch)

66 May 1996