
7193 Owner’s Guide | Commands |
If you have programmed the printer to handle the busy line the old way, but wish to
1.Record the current switch settings for their
2.Set switches 2, 3, and 6 to OFF, and set switches 1, 4, and 5 to ON.
3.Power cycle the printer.
4.Wait until the printer beeps to store the parameter change in NVRAM.
5.Restore the switches to their
6.Power cycle the printer.
7.Print out the diagnostics to be sure that the busy line parameter changed.
Real Time Status Transmission
Transmits the selected one byte printer status specified by n in Real Time according to the following parameters.
GS Sequence
Hex | Decimal ASCII | Value of n | |
1D 04 n | 29 4 n GS EOT n | 1 | = Transmit printer status |
|
| 2 | = Transmit |
|
| 3 | = Transmit error status |
|
| 4 | = Transmit receipt paper status |
The command is ignored if n is out of range. n=2:
May 1996